|
|
|
 |
We can offer LM Series and casting alloys primary, secondary and pressure die casting alloys. |
 |
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Ni |
Zn |
Sn |
Ti |
Pb |
LM2 |
9.0-11.5 | 1 | 0.7-2.5 | 0.5 | 0.3 | 0.5 | 2 | 0.2 | 0.2 | 0.3 |
LM4 |
4.0-6.0 | 0.8 | 2.0-4.0 | 0.2-0.6 | 0.15 | 0.3 | 0.5 | 0.1 | 0.2 | 0.1 |
LM5 |
0.3 | 0.6 | 0.1 | 0.3-0.7 | 3.0-6.0 | 0.1 | 0.1 | 0.05 | 0.2 | 0.05 |
LM6 |
10.0-13.0 | 0.6 | 0.1 | 0.5 | 0.1 | 0.1 | 0.1 | 0.05 | 0.2 | 0.1 |
LM9 |
10.0-13.0 | 0.6 | 0.1 | 0.3-0.70 | 0.2-0.6 | 0.1 | 0.1 | 0.05 | 0.2 | 0.1 |
LM10 |
0.25 | 0.35 | 0.1 | 0.1 | 9.5-11.0 | 0.1 | 0.1 | 0.05 | 0.2 | 0.2 |
LM12 |
2.5 | 1 | 9.0-11.0 | 0.6 | 0.2-0.4 | 0.5 | 0.8 | 0.1 | 0.2 | 0.1 |
LM13 |
10.0-12.0 | 1 | 0.7-1.5 | 0.5 | 0.8-1.5 | 1.5 | 0.05 | 0.1 | 0.2 | 0.1 |
LM16 |
4.5-5.5 | 0.6 | 1.0-1.5 | 0.5 | 0.4-0.6 | 0.25 | 0.1 | 0.05 | 0.2 | 0.1 |
LM18 |
4.5-6.0 | 0.6 | 0.1 | 0.5 | 0.1 | 0.1 | 0.1 | 0.5 | 0.2 | 0.1 |
LM20 |
10.0-13.0 | 1 | 0.4 | 0.5 | 0.2 | 0.1 | 0.2 | 0.1 | 0.2 | 0.1 |
LM21 |
5.0-7.0 | 1 | 3.0-5.0 | 0.2-0.6 | 0.1-0.3 | 0.3 | 2 | 0.1 | 0.2 | 0.2 |
LM22 |
4.0-6.0 | 0.6 | 2.8-3.8 | 0.2-0.6 | 0.05 | 0.15 | 0.15 | 0.05 | 0.2 | 0.1 |
LM24 |
7.5-9.5 | 1.3 | 3.0-4.0 | 0.5 | 0.3 | 0.5 | 3 | 0.2 | 0.2 | 0.3 |
LM25 |
6.5-7.5 | 0.5 | 0.1 | 0.3 | 0.2-0.45 | 0.1 | 0.1 | 0.05 | 0.2 | 0.1 |
LM26 |
8.5-10.5 | 1.2 | 2.0-4.0 | 0.5 | 0.5-1.5 | 1 | 1 | 0.1 | 0.2 | 0.2 |
LM27 |
6.0-8.0 | 0.8 | 1.5-2.5 | 0.2-0.6 | 0.3 | 0.3 | 1 | 0.1 | 0.2 | 0.2 |
LM28 |
17.0-20.0 | 0.7 | 1.3-1.8 | 0.6 | 0.8-1.5 | 0.8-1.5 | 0.2 | 0.1 | 0.2 | 0.1 |
LM29 |
22.0-25.0 | 0.7 | 0.8-1.3 | 0.6 | 0.8-1.3 | 0.8-1.3 | 0.2 | 0.1 | 0.2 | 0.1 |
LM30 |
16.0-18.0 | 1.1 | 4.0-5.0 | 0.3 | 0.4-0.7 | 0.1 | 0.2 | 0.1 | 0.2 | 0.1 |
ADC12 |
9.5-11.5 | 1 | 1.5-2.5 | 0.5 | 0.3 | 0.5 | 1.5 | 0.1 | 0.2 | 0.1 |